Konica Minolta C451 Benutzerhandbuch
Setting up the PCL driver (Windows)
5
C451
5-9
–
Unit: Selects the measurement unit that specifies the size.
3
Click the [OK] button.
2
Note
For custom sizes that are used often, it comes in handy if you add them
to the paper size list. Add a custom paper size from the Settings tab. For
details, refer to “Specifying the Settings tab settings” on page 5-48.
to the paper size list. Add a custom paper size from the Settings tab. For
details, refer to “Specifying the Settings tab settings” on page 5-48.
If using banner paper, specify the size of the banner paper in Custom
Size. For details, refer to “Printing on banner paper” on page 9-68.
Size. For details, refer to “Printing on banner paper” on page 9-68.
Selecting the paper tray
You can specify the paper you want to use for printing by selecting the paper
tray that contains the loaded paper.
tray that contains the loaded paper.
1
Click the Basic tab.
2
From the “Paper Tray” drop-down list, select the desired paper tray.
2
Note
If “Auto” is specified as the paper tray, you can select the paper type. If
the paper tray setting is changed to a setting other than “Auto”, the paper
type is fixed to its preregistered setting. Specify a paper type by clicking
the [Paper Settings for Each Tray] button. For details, refer to “Specifying
the paper type for a paper tray” on page 5-10.
the paper tray setting is changed to a setting other than “Auto”, the paper
type is fixed to its preregistered setting. Specify a paper type by clicking
the [Paper Settings for Each Tray] button. For details, refer to “Specifying
the paper type for a paper tray” on page 5-10.