Konica Minolta 2590 MF Benutzerhandbuch
Basic Fax Operation
32
Sending a Fax Using the Original Glass
1
Press the Fax key to enter Fax mode.
2
Remove all documents from the ADF.
"
If you are using the original glass to scan, do not load any documents
into the ADF.
into the ADF.
3
Lift to open the ADF cover.
4
Place the original document face down on the original glass and align the
document on the scales above and to the left of the original glass.
document on the scales above and to the left of the original glass.
5
Gently close the ADF cover.
"
Closing it too quickly may cause the document to move on the original
glass.
glass.
6
Press the Resolution key to specify the desired image quality.
"
The document image quality can be adjusted by pressing the Resolu-
tion key. For details, refer to “Improving Resolution” on page 34.
tion key. For details, refer to “Improving Resolution” on page 34.
7
Specify the fax number of the recipient in one of the following ways:
–
Direct dialing
–
Using the one-touch dial keys (including group dialing)
–
Using the speed dial numbers
–
Using the phone book functions
–
Using the Redial/Pause key
"
For details on specifying the recipient, refer to “Specifying a Recipient”
on page 34. For details on using the Redial/Pause key, refer to “Using
the Redial Function” on page 38.
on page 34. For details on using the Redial/Pause key, refer to “Using
the Redial Function” on page 38.
"
A transmission can also be sent to multiple recipients with the Broad-
cast function. For details on sending a broadcast transmission, refer to
“Sending a Fax to Multiple Recipients (Broadcast Transmission)” on
page 38.
cast function. For details on sending a broadcast transmission, refer to
“Sending a Fax to Multiple Recipients (Broadcast Transmission)” on
page 38.
8
Press the Start key.
A screen appears, requesting confirmation of the scanning area.
A screen appears, requesting confirmation of the scanning area.
9
To scan the displayed scanning area, press the Menu Select key. The
document is scanned.
document is scanned.
"
To change the displayed scanning area, press the
,
key, select the
desired scanning area in the next screen that appears, and then press
the Menu Select key. Press the Menu Select key again to start scan-
ning.
the Menu Select key. Press the Menu Select key again to start scan-
ning.