Konica Minolta 2450 Benutzerhandbuch
Output Tray
74
In addition, if “N-up” has been set to “Booklet”, autoduplex printing is per-
formed.
The following Order settings are available when “Booklet” is selected.
formed.
The following Order settings are available when “Booklet” is selected.
1
Load plain paper into the tray.
2
From the printer driver, specify the layout for duplex printing.
3
Click OK.
"
With autoduplexing, the back side is printed first, and then the front
side is printed.
side is printed.
Output Tray
All printed media is output to the face-down output tray on top of the printer.
This tray has a capacity of approximately 200 sheets (A4/Letter) of 80 g/m
This tray has a capacity of approximately 200 sheets (A4/Letter) of 80 g/m
2
(22 lb) paper.
"
If the media is stacked too high in the output tray, your printer may
experience media misfeeds, excessive media curl, or static buildup.
experience media misfeeds, excessive media curl, or static buildup.
"
Remove transparencies as soon as possible from the output tray to
avoid static buildup.
avoid static buildup.
If “Left Binding” is selected, the pages can be folded as a
left-bound booklet.
left-bound booklet.
If “Right Binding” is selected, the pages can be folded as a
right-bound booklet.
right-bound booklet.
1
1
2
3
3
3
1
1
2