HP (Hewlett-Packard) CF081A#BGJ Benutzerhandbuch
Low voltage power supply
Before proceeding, remove the following components:
●
Toner collection unit. See
.
●
Formatter. See
●
Right rear cover. See
.
●
●
.
NOTE:
It is not necessary to separate the upper rear cover from the rear cover to remove the
low voltage power supply.
●
Interconnect board (ICB). See
NOTE:
The formatter cage is attached to the low voltage power supply (LVPS). Remove both
components as an assembly. You can then remove the formatter cage from the LVPS.
Remove the low voltage power supply
CAUTION:
ESD sensitive part.
1.
Disconnect four connectors (callout 1; J100 and J101 on the DC controller PCA).
NOTE:
NOTE:
If the ICB is removed with the power supply, as noted in the above bulleted list, also
disconnect one FFC (J105) on the DC controller and the connector on the top of the ICB.
Figure 2-132
Remove the low voltage power supply (1 of 7)
1
ENWW
Internal assemblies
163