HP (Hewlett-Packard) CF081A#BGJ Benutzerhandbuch

Insert a folded piece of paper into each slot at the same time until the product is in a Ready state.

  Diagnostic test (3 of 3)

Use this diagnostic test to print internal pages or send an external job to the product when one or more

print cartridges are removed or exchanged. Consumable supply errors are ignored while the product is

in this mode. When the product is in this mode, you can navigate the troubleshooting menus and print

internal pages (the print quality pages will be the most useful). This test can be used isolate problems,

such as noise, and to isolate print-quality problems that are related to individual print cartridges.

Cartridges are not keyed and can be interchanged. An error will display on the control panel

if a print cartridge is installed in the wrong position. The Supplies menu will explain which print

cartridge is misplaced.

Do not remove or exchange print cartridges until after you start the disable cartridge check

diagnostic.

Press the Home   button.

Open the following menus:

●

●

●

Press the Down arrow   button to highlight Disable Cartridge Check, and then press the 

OK

button.

To exit this diagnostic test, press the Stop   button and then select Exit Troubleshooting.

256

Chapter 3   Solve problems

ENWW