HP (Hewlett-Packard) CF081A#BGJ Benutzerhandbuch
Manual sensor test
Use this diagnostic test to manually test the product sensors and switches. Each sensor is represented by
a letter and number on the control panel display.
1.
Press the Home button.
2.
Open the following menus:
●
Administration
●
Troubleshooting
●
Diagnostic Tests
3.
Press the Down arrow button to highlight the Manual Sensor Test item, and then press the
OK
button.
To exit this diagnostic, press the
Stop
key, and then select Exit Troubleshooting.
Menus cannot be opened during this test, so the
OK
button serves the same function as the Stop
button.
Table 3-7
Manual sensor diagnostic tests
Sensor or switch name
Sensor or switch number
Front door switch
SW1
Registration
SR8
Fuser loop 1
SR14
Fuser loop 2
SR15
Fuser pressure release
SR7
Fuser output
SR5
Duplexer refeed
SR22
Developer alienation
SR11
ITB alienation
SR17
Output bin full
SR6
260
Chapter 3 Solve problems
ENWW