HP (Hewlett-Packard) CF081A#BGJ Benutzerhandbuch
Fuser output sensor
1.
Open the right door.
2.
Lower the secondary transfer assembly.
3.
Remove the fuser assembly, and then verify that the sensor flag on the fuser assembly moves
freely. If the sensor flag does not move freely, replace the fuser. See
Figure 3-7
Test the fuser output sensor (1 of 2)
4.
Insert a piece of paper to activate the sensor.
Figure 3-8
Test the fuser output sensor (2 of 2)
5.
Check the control-panel display for a sensor response.
6.
If there is no response, replace the fuser output sensor.
ENWW
Tools for troubleshooting
263