HP (Hewlett-Packard) CF081A#BGJ Benutzerhandbuch
Tray 2 cassette sensor
1.
Remove Tray 2.
NOTE:
The Tray 2 Cassette sensor flag is on the back of Tray 2. Inspect the flag to verify that it
is aligned correctly. If it is bent upward, it might miss the sensor when installed.
Figure 3-21
Test the Tray 2 cassette sensor (1 of 2)
2.
Insert a piece of paper in the Tray 2 cassette sensor.
Figure 3-22
Test the Tray 2 cassette sensor (2 of 2)
3.
Check the control-panel display for sensor response.
4.
If there is no response, replace the lifter-drive assembly.
274
Chapter 3 Solve problems
ENWW