HP (Hewlett-Packard) CF081A#BGJ Benutzerhandbuch

In the following table, asterisks (*) indicate the factory default setting.

Range: 5 – 300 sec

Default = 15

Use this feature to set the I/O timeout period
in seconds. I/O timeout refers to the elapsed
time before a print job fails. If the stream of
data that the product receives for a print job
gets interrupted, this setting indicates how
long the product will wait before it reports
that the job has failed. The range is 5 - 300
seconds. The default setting is 15 seconds.

See the table that follows for details.

 

 

 

 

No*

Yes: Prints a
page that contains
the current
security settings
on the HP Jetdirect
print server.

No: A security
settings page is
not printed.

 

 

 

On*

On: Enable the
TCP/IP protocol.

Off: Disable the
TCP/IP protocol.

 

 

 

 

Use the arrow
buttons to edit the
host name.

NPIXXXXXX*

An alphanumeric
string, up to 32
characters, used
to identify the
product. This
name is listed on
the HP Jetdirect
configuration
page. The default
host name is
NPIxxxxxx, where
xxxxxx is the last
six digits of the
LAN hardware
(MAC) address.

ENWW

Tools for troubleshooting

365