HP (Hewlett-Packard) CF081A#BGJ Benutzerhandbuch

If the error persists, replace the internal hard drive.

Internal disk device is spinning up its platter. Jobs that require disk access must wait.

No action is necessary.

This message appears even though there is media loaded in the tray.

Use the cassette media present sensor test in the Tray/bin manual sensor test to verify that the sensor is

correctly functioning.

Make sure that the sensor flag on the media presence sensor is not damaged and moves freely.

Reconnect the corresponding connector:

◦

MP tray: connector (J85, J90) on the MP tray media out sensor and the connector (J107) on the

DC controller PCA.

◦

Printer cassette: connectors (J6) on the cassette media out sensor and the connector (J131) on the

DC controller PCA.

◦

1 X 500-sheet paper feeder cassette: connector (J55D) on the paper feeder cassette media out

sensor and the connector (J106) on the paper feeder controller PCA.

This message appears when the indicated tray is selected but is not loaded, and other paper trays are

available for use. It also appears when the tray is configured for a different paper type or size than the

print job requires.

Load the correct paper in the tray.

If prompted, confirm the size and type of paper loaded.

Otherwise, press the 

OK

 button to select another tray.

ENWW

Tools for troubleshooting

451