Manualsbrain.com
  1. Handbücher
  2. Marken
  3. HP (Hewlett-Packard)
  4. CF081A#BGJ
  5. Benutzerhandbuch

HP (Hewlett-Packard) CF081A#BGJ Benutzerhandbuch

Download
Seite von 646
Tray <X> overfilled
Description
The tray is filled above the stack-height mark.
◦
X = 2
Tray 2
◦
X = 3
Tray 3
Recommended action
Remove enough paper so that the paper stack does not exceed the limit for the tray.
NOTE:
If this message appears after lifter drive assembly was removed or replaced, make sure that
the connector on the assembly is correctly connected and fully seated.
Troubleshooting
Description
The product is in the Troubleshooting process.
Recommended action
Press the Stop button  .
To exit press 
Type mismatch Tray <X>
Description
The specified tray contains a paper type that does not match the configured type.
Recommended action
The specified tray will not be used until this condition is addressed. Printing can continue from other
trays.
1. Load the correct paper in the specified tray.
2. At the control panel, verify the type configuration.
Unsupported drive installed To continue, press OK
Description
A non-supported hard drive has been installed. The drive is unusable by this product.
464
Chapter 3   Solve problems
ENWW