HP (Hewlett-Packard) CF081A#BGJ Benutzerhandbuch

The OHT sensor detects overhead transparencies. The OHT sensor is a transmission sensor that uses an

LED. The DC controller determines a media mismatch and notifies the formatter when the media type

differs from the media type detected by the OHT sensor. The DC controller turns the LED in the OHT

sensor on and off during the wait or initial rotation period. If the intensity of the light does not match the

specified value, the DC controller determines that the OHT sensor has failed.

The fusing and delivery unit fuses the toner onto the paper and delivers the printed page into the output

bin. The following controls ensure optimum print quality:

●

Loop control

●

Pressure roller pressurization/depressurization control

A sensor detects when the output bin is full, and the DC controller notifies the formatter.

  Fuser and delivery unit

Fuser/delivery block

Y

M

C

K

52

Chapter 1   Theory of operation

ENWW