IBM TDS400 Benutzerhandbuch
28
Océ TDS400 User Manual
▼
Turn off the printer
1
Set the ON/OFF switch at the rear of the printer to position ‘0’ (see Figure 4).
Attention:
If you switch off the printer during a print job, it is possible that
you lose information or that a paper jam occurs.
▼
Turn on the controller
1
Press the key on the front of the controller.
▼
Turn off the controller
1
Select the ‘Shut down’ option from the Océ System Control Panel. You can do
this through both the controller and through Océ Remote Logic®.
this through both the controller and through Océ Remote Logic®.
2
Switch off the controller and the monitor.
Cancel a print
Cancel a print before you start the print or during the print.
▼
Cancel a print
1
Press the Stop key.
The printer stops.
When the printer runs, the paper is cut.
The paper is always ejected.
The printer stops.
When the printer runs, the paper is cut.
The paper is always ejected.