Ricoh Fax 2210L Benutzerhandbuch

T

ROUBLESHOOTING

8.10

No. Not 
Assigned

The one-touch or speed 
dial location you tried to 
use has no number 
assigned to it.

Dial the number manually using 
the number keypad or assign the 
number. For storing a number, see 
“Automatic Dialing” on page 4.15.

[No Paper]
Add Paper

The paper tray has run out 
of paper.

Load paper in the paper tray. See 
page 1.11.

Operation 
Not Assigned

You are in the Add/Cancel 
operation, but there are 
no jobs waiting.

Check the display to see if there 
are any scheduled jobs. The 
display should indicate them in 
Standby mode, for example, Delay 
Fax.

[Paper Jam 0]
Open/Close Door

Paper has jammed in the 
feeding area of the paper 
tray.

Clear the jam. See page 8.3.

[Paper Jam 1]
Open/Close Door

• Paper has jammed in 

the paper exit area.

• A paper jam has 

occurred in the 
manual feeder or the 
machine detects 
non-feeding from 
the manual feeder.

Clear the jam. See page 8.6.

[Paper Jam 2]
Check Inside

Paper has jammed in the 
fuser area.

Clear the jam. See page 8.5.

[Power Failure]

Power has turned off then 
on and the machine’s 
memory has not been 
saved.

You need to restart the job you 
were trying to do before the power 
failure.

[Retry Redial?]

The machine is waiting for 
a specified time interval to 
redial a previously busy 
station.

You can press Enter to 
immediately redial, or Clear/
Stop to cancel the redial 
operation.

[Stop Pressed]

The 

 button is 

pressed during a copy or 
fax operation.

Try again.

[Toner Empty]

The toner cartridge has 
run out. The machine 
stops printing.

Replace with a new toner 
cartridge. See page 7.8.

[Toner Low]

The toner cartridge is 
almost empty.

Take out the toner cartridge and 
gently shake it. By doing this, you 
can temporarily reestablish 
printing operations.