Ricoh JP5000 Benutzerhandbuch

165

If a malfunction or a misfeed occurs within the machine, the following messages
will appear on the panel display.

Drum unit is not set.

Set Drum unit.

Make sure that the drum is completely set in position.

Max. quantity: ****

The number of prints exceeds the maximum print 
quantity.

You can change the maximum number of prints that 
can be made in one operation with the user tools. See 
“Max. Quantity” in 

 P.136 “2. Set Operation Modes”.

Min. quantity: ****

The number of prints does not exceed the minimum 
print quantity.

You can change the minimum number of prints that 
can be made in one operation with the user tools. See 
“Min. Quantity” in 

Set original.

Set command sheet.

Make prints after you confirm whether there is an 
original or a command sheet on the exposure glass 
(contact glass).

Make sure that you have changed the original on the 
exposure glass (contact glass) before pressing the 

{

} key.

Size of original and paper is 
not same.

Set a paper size that matches the reproduction ratio 
you have selected and your original.

The reproduction ratio selected by Auto Magnifica-
tion Selection mode is too big or too small.

❒ You can make prints if you press the 

{

} key.