Ricoh MP C1500 Benutzerhandbuch

Network Settings

27

❒ In [Effective Protocol], check that the protocol you want to use is set to [Effective].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed. If

both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.

p.54 “Interface Settings”
p.63 “File Transfer”

This section lists the settings required for sending file with IEEE 1394 interface
cable.
For details about how to specify the settings, see “Interface Setting” and “File
Transfer”.

❒ [IEEE 1394] is displayed when the IEEE 1394 interface board is installed.
❒ In [Effective Protocol], check that the protocol you want to use is set to [Effective].

Interface Setting/Network Permit SNMPv3 Communictn.

As required

Interface Setting/Network Permit SSL/TLS Comm.

As required

Interface Setting/Network Host Name

As required

File Transfer Setting

Default User Name/PW(Send)

As required

File Transfer Setting

Scanner Resend Time

As required

File Transfer Setting

Scanner Resend Setting

As required

Interface Setting/IEEE 1394 IPv4 Address

Necessary

Interface Setting/IEEE 1394 DDNS Configuration

As required

Interface Setting/IEEE 1394 Host Name

As required

Interface Setting/IEEE 1394 Domain Name

As required

Interface Setting/IEEE 1394 WINS Configuration

As required

Interface Setting/IEEE 1394 IPv4 over 1394

Necessary

Interface Setting/Network IPv4 Gateway Address

Necessary

Interface Setting/Network DNS Configuration

As required

Interface Setting/Network Effective Protocol

Necessary

File Transfer Setting

Default User Name/PW(Send)

As required

File Transfer Setting

Scanner Resend Time

As required

File Transfer Setting

Scanner Resend Setting

As required