Ricoh MP C1500 Benutzerhandbuch
System Settings
58
2
Parallel Interface
This section describes the user tools in the Parallel Interface menu under Inter-
face Settings. [Parallel Interface] is displayed when this machine is installed with
the IEEE 1284 interface board.
face Settings. [Parallel Interface] is displayed when this machine is installed with
the IEEE 1284 interface board.
❖ Parallel Timing
Sets the timing for the control signal of the parallel interface.
• ACK inside
• ACK outside
• STB down
• ACK inside
• ACK outside
• STB down
❖ Parallel Comm. Speed
Sets the communication speed for the parallel interface.
• High Speed
• Standard
• High Speed
• Standard
❖ Selection Signal Status
Sets the level for the select signal of the parallel interface.
• High
• Low
• High
• Low
❖ Input Prime
Sets whether to validate or invalidate the input prime signal upon reception.
• Effective
• Invalid
• Effective
• Invalid
❖ Bidirectional Comm.
Sets the printer's response mode to a status acquisition request when using a
parallel interface.
• On
• Off
When set to [Off], bidirectional communication function will be disabled, and
the printer driver will not be installed under Windows Auto Detect function.
parallel interface.
• On
• Off
When set to [Off], bidirectional communication function will be disabled, and
the printer driver will not be installed under Windows Auto Detect function.
❖ Signal Control
Specify how error during printing or sending facsimile from the computer is
to be dealt with.
• Job Acceptance Priority
• Printer Priority
to be dealt with.
• Job Acceptance Priority
• Printer Priority