Sharp AL-1644 Benutzerhandbuch
20
BEFORE USING THE MACHINE
4
Squeeze the lock lever of the front
guide and slide the front guide to
match the width of the paper, and
move the left guide to the appropriate
slot as marked on the tray.
guide and slide the front guide to
match the width of the paper, and
move the left guide to the appropriate
slot as marked on the tray.
• The front guide is a slide-type guide. Grasp the
locking knob on the guide and slide the guide to the
indicator line of the paper to be loaded.
indicator line of the paper to be loaded.
• The left guide is an insert-type guide. Remove it and
then insert it at the indicator line of the paper to be
loaded.
loaded.
5
Press the [START] key (
) and then
press the [PAPER SIZE ENTER] key
(
(
).
To change the paper size
setting of another tray,
repeat steps 2 to 5 after
pressing the [START]
key (
setting of another tray,
repeat steps 2 to 5 after
pressing the [START]
key (
).
Important points when using the printer mode
• Make sure that the tray's paper size setting is the
same as the tray's paper size setting in the printer
driver. For example, if the tray's paper size setting is
A4R, set "Setting Paper Size" to "A4-R". For more
information, see "CONFIGURING THE PRINTER
DRIVER" (p.11) in the "Software Setup Guide".
driver. For example, if the tray's paper size setting is
A4R, set "Setting Paper Size" to "A4-R". For more
information, see "CONFIGURING THE PRINTER
DRIVER" (p.11) in the "Software Setup Guide".
Affix the paper size label for the paper size
selected in step 3 to the label position on the
right end of the tray.
selected in step 3 to the label position on the
right end of the tray.
Left guide
Front guide
Note
AL-1633_1644_EX.book 20 ページ ２００３年１０月２３日 木曜日 午後８時２１分