Sharp AL-1644 Benutzerhandbuch
63
TROUBLESHOOTING
5
5
Remove the new drum cartridge from
the protective bag and gently insert
the lead end of the drum cartridge
along the guides.
the protective bag and gently insert
the lead end of the drum cartridge
along the guides.
6
Remove the protective cover from the
drum cartridge and then push the
cartridge all the way into the machine.
drum cartridge and then push the
cartridge all the way into the machine.
7
Insert the TD cartridge along the
guides until it locks in place.
guides until it locks in place.
If there is any dirt or dust
on the TD cartridge,
remove it before
installing the cartridge.
on the TD cartridge,
remove it before
installing the cartridge.
8
Close the front cover and side cover.
The drum cartridge
replacement required
indicator (
replacement required
indicator (
) will go
out.
Do not touch the drum cartridge (green
portion). Doing so may damage the drum and
cause smudges on copies.
portion). Doing so may damage the drum and
cause smudges on copies.
• Before closing the front cover, make sure
that the TD cartridge and drum cartridge is
correctly installed.
correctly installed.
• When closing the front cover, gently hold
both ends.
Caution
1
2
Note
!Chapter5.fm 63 ページ ２００４年３月２６日 金曜日 午前１１時３３分