Sharp AR-M201 Benutzerhandbuch
USER SETTINGS
56
11
2-SIDED COPY
MODE
MODE
1: HI-SPEED
2: NORMAL
2: NORMAL
• If the memory fills up when two-
sided copying is performed,
"NORMAL" can be selected to
make copying possible.
However, "NORMAL" results in a
slower copying speed. Normally
"HI-SPEED" is selected to
enable fast two-sided copying.
"NORMAL" can be selected to
make copying possible.
However, "NORMAL" results in a
slower copying speed. Normally
"HI-SPEED" is selected to
enable fast two-sided copying.
12
MARGIN WIDTH
1: 5 mm (1/4")
2: 10 mm (1/2")
3: 15 mm (3/4")
4: 20 mm (1")
2: 10 mm (1/2")
3: 15 mm (3/4")
4: 20 mm (1")
• Use this setting to set the
margin width.
13
MEM. FOR
PRINTER
PRINTER
1: 30%
2: 40%
3: 50%
4: 60%
5: 70%
2: 40%
3: 50%
4: 60%
5: 70%
• Use this to change the
proportion of machine
memory used for printer
mode.
memory used for printer
mode.
14
AUTO KEY
REPEAT
REPEAT
1: ON
2: OFF
2: OFF
• Use this setting to select
whether or not holding down a
key causes repeated input of
the key. For keys that normally
cause a set value to decrease
or increase when held down
(for example, the [
key causes repeated input of
the key. For keys that normally
cause a set value to decrease
or increase when held down
(for example, the [
] key
(
) or [
] key (
)), this
program can be used to have
the set value not change
when the key is held down.
the set value not change
when the key is held down.
15
KEY PRESS TIME
1: NORMAL
2: 0.5 SEC.
3: 1.0 SEC.
4: 1.5 SEC.
5: 2.0 SEC.
2: 0.5 SEC.
3: 1.0 SEC.
4: 1.5 SEC.
5: 2.0 SEC.
• Use this setting to select how
long a key must be pressed
for the input to be accepted.
By selecting a longer time,
you can prevent settings from
being changed by the
accidental pressing of a key.
for the input to be accepted.
By selecting a longer time,
you can prevent settings from
being changed by the
accidental pressing of a key.
16
KEY TOUCH
SOUND
SOUND
1: LOW
2: HIGH
3: OFF
2: HIGH
3: OFF
• This sets the volume of beep
signals. (p.60)
17
SOUND AT
DEFAULT
DEFAULT
1: ON
2: OFF
2: OFF
• Use this to sound a beep
when a base setting is
selected. (p.60)
selected. (p.60)
18
TONER SAVE
MODE
MODE
1: ON
2: OFF
2: OFF
• This mode reduces toner
usage by about 10% when
copying. Toner save mode is
effective when the exposure
mode is AUTO or TEXT.
copying. Toner save mode is
effective when the exposure
mode is AUTO or TEXT.
Program
number
Program name
Setting codes
(factory default
(factory default
setting appears
in bold)
Explanation
!AR-M201.book 56 ページ 2008年2月12日 火曜日 午後7時41分