OKI 460 Benutzerhandbuch

20 • Getting Started

Your machine is supplied with the following drivers:
• TWAIN (scanner) driver: Windows only, USB only 
• Printer driver: PCL5e (all models), PCL 6 (all models), PostScript3 (MB470 MFP & 

MB480 MFP only)

• Fax driver: Windows only, MB470 MFP & MB480 MFP only 

The MFP is a “dual device” - Windows sees it as a scanner and a printer. Therefore, 

you must install two different drivers; the TWAIN (scanner) driver and the printer 

driver.
The installation instructions below refer to USB connection. For network connection 

details refer to the Setup/Reference Guide.
If you are running Windows Server 2003 or Server 2008, you may need to follow 

these steps to ensure WIA service starts when using the TWAIN driver and Actkey 

Utility.
1. Click Start > Administrative Tools > Services.
2. Double-click Services.
3. Double-click Windows Image Acquisition (WIA).
4. From the Startup type menu, select Automatic.
5. Under Service status, click Start.
6. Click OK.

Pull Scanning = initiating a scan from your computer via software.
Push Scanning: initiating a scan by pressing a button on the MFP’s front panel
The TWAIN driver is used for “Pull Scanning”l. The TWAIN driver only works via USB 

connections. This means it's not possible to control the scanner over the network from 

your computer.

There are two ways of installing the drivers:

Note
You must be logged on as an administrator or a member of the 

Administrators group in order to complete this procedure. If your 

computer is connected to a network, network policy settings may also 

prevent you from completing this procedure.