Panasonic KX-FPG381 Benutzerhandbuch
8. Programmable Features
69
“ERROR” (default): A sending report will be
printed only when fax transmission fails.
“ON”: A sending report will be printed out after
every transmission.
“OFF”: Sending reports will not be printed out.
printed only when fax transmission fails.
“ON”: A sending report will be printed out after
every transmission.
“OFF”: Sending reports will not be printed out.
Code #06: Changing the ring setting in FAX
ONLY mode
ONLY mode
FAX RING COUNT
RINGS=3
RINGS=3
[
±]
To change the number of rings before the unit
answers a call in FAX ONLY mode.
You can select “1”, “2”, “3” (default) or “4”.
answers a call in FAX ONLY mode.
You can select “1”, “2”, “3” (default) or “4”.
Code #06: Changing the ring setting in
TAM/FAX mode
TAM/FAX mode
TAM RING COUNT
RINGS=2
RINGS=2
[
±]
To change the number of rings before the unit
answers a call in TAM/FAX mode. You can select
“2” (default), “3”, “4”, “5”, “6”, “7” or “TOLL
SAVER
answers a call in TAM/FAX mode. You can select
“2” (default), “3”, “4”, “5”, “6”, “7” or “TOLL
SAVER
”. See page 55 for details.
Note:
L
You can also program this feature with the
handset (page 75).
handset (page 75).
Code #10: Changing the maximum recording
time for each incoming message
time for each incoming message
RECORDING TIME
MODE=3 MIN
MODE=3 MIN
[
±]
“1 MIN”, “2 MIN” or “3 MIN” (default): 1 minute
to 3 minutes.
“GREETING ONLY”: Only plays your greeting
message.
to 3 minutes.
“GREETING ONLY”: Only plays your greeting
message.
Note:
L
If you select “GREETING ONLY”, the unit will
answer a call with the greeting message, and
then hang up. The unit will not record any
incoming messages.
answer a call with the greeting message, and
then hang up. The unit will not record any
incoming messages.
L
You can also program this feature with the
handset (page 75).
handset (page 75).
Code #11: Setting the remote operation ID
REMOTE TAM ID
ID=11
ID=11
1. Press {MENU}.
2. Press {#}, then {1}{1}.
3. Enter any 2-digit number (00–99).
L
The default ID is “11”.
4. Press {SET}.
5. Press {MENU}.
Note:
L
You can also program this feature with the
handset (page 76).
handset (page 76).
Code #13: Setting the dialing mode
DIALING MODE
MODE=TONE
MODE=TONE
[
±]
If you cannot make calls, change this setting
depending on your telephone line service.
“TONE” (default): For tone dial service.
“PULSE”: For rotary pulse dial service.
depending on your telephone line service.
“TONE” (default): For tone dial service.
“PULSE”: For rotary pulse dial service.
Note:
L
You can also program this feature with the
handset (page 74).
handset (page 74).
Code #16: Setting the recording paper size
PAPER SIZE
=LETTER
=LETTER
[
±]
“LETTER” (default): Letter or legal size paper.
“A4”: A4 size paper.
“A4”: A4 size paper.
Code #17: Setting the ringer tone for external
calls
calls
RINGER TONE
MODE=1
MODE=1
[
±]
To set the base unit ringer tone from one of 6
patterns for external calls. You can select “1”
(default), “2”, “3”, “4”, “5” or “6”.
patterns for external calls. You can select “1”
(default), “2”, “3”, “4”, “5” or “6”.
Note:
L
To set the handset ringer tone, see page 74.
8.3 Advanced features
Code #22: Setting the journal report to print
automatically
automatically
AUTO JOURNAL
MODE=ON
MODE=ON
[
±]
“ON” (default): The unit will print a journal report
automatically after every 30 new fax
communications (page 51).
“OFF”: The unit will not print a journal report, but
will keep a record of the last 30 fax
communications.
automatically after every 30 new fax
communications (page 51).
“OFF”: The unit will not print a journal report, but
will keep a record of the last 30 fax
communications.
Code #23: Sending documents overseas
OVERSEAS MODE
MODE=ERROR
MODE=ERROR
[
±]
If you have difficulty sending an overseas fax,
activate this feature before starting transmission.
“NEXT FAX”: This setting is effective only for the
next attempted fax transmission. After
activate this feature before starting transmission.
“NEXT FAX”: This setting is effective only for the
next attempted fax transmission. After
0519_FPG381.book Page 69 Monday, May 19, 2003 6:46 PM