Panasonic KX-FPG381 Benutzerhandbuch
8. Programmable Features
72
L
You will be able to access the mailbox without
entering the password.
entering the password.
Note:
L
You can also program this feature with the
handset (page 76).
handset (page 76).
Code #54: Changing the recording time for
your TAM/FAX greeting message
your TAM/FAX greeting message
GREETING TIME
MODE=16s
MODE=16s
[
±]
“16s” (default): Maximum recording time is 16
seconds.
“60s”: Maximum recording time is 60 seconds.
See page 61 for details.
seconds.
“60s”: Maximum recording time is 60 seconds.
See page 61 for details.
Code #59: Copying directory data from the
base unit to a handset
base unit to a handset
COPY DIRECTORY
=1 ITEM
=1 ITEM
[
±]
See page 39 for details.
Code #62: Setting line mode
SET LINE MODE
MODE=B
MODE=B
[
±]
The default setting of the line mode is “B”.
Generally leave this setting to “B”. If a change of
the line mode setting is required by our customer
call center or service personnel, change the line
mode to “A”.
Generally leave this setting to “B”. If a change of
the line mode setting is required by our customer
call center or service personnel, change the line
mode to “A”.
Note:
L
You can also program this feature with the
handset (page 75).
handset (page 75).
Code #67: Setting the incoming message
monitor
monitor
ICM MONITOR
MODE=ON
MODE=ON
[
±]
To hear an incoming message (ICM) from the
speaker when the answering machine is
recording the message.
“ON” (default): You can monitor the incoming
message.
“OFF”: Deactivates this feature.
speaker when the answering machine is
recording the message.
“ON” (default): You can monitor the incoming
message.
“OFF”: Deactivates this feature.
Code #72: Setting flash time
SET FLASH TIME
MODE=700ms
MODE=700ms
[
±]
The flash time depends on your telephone
exchange or host PBX.
You can select “90ms” (milliseconds), “100ms”,
“110ms”, “250ms”, “300ms”, “400ms”, “600ms”
or “700ms” (default).
exchange or host PBX.
You can select “90ms” (milliseconds), “100ms”,
“110ms”, “250ms”, “300ms”, “400ms”, “600ms”
or “700ms” (default).
Note:
L
If the unit is connected via a PBX, PBX
functions (transferring a call etc.) might not
work correctly. Consult your PBX supplier for
the correct setting.
functions (transferring a call etc.) might not
work correctly. Consult your PBX supplier for
the correct setting.
L
You can also program this feature with the
handset (page 75).
handset (page 75).
Code #73: Setting incoming call tone
INCOMING CALL
MODE=2
MODE=2
[
±]
During an intercom call (page 45) or while using
the room monitor feature (page 48) or while
listening to messages (page 62, 64), you can be
informed by 2 tones if a call arrives.
“2” (default): The incoming call tone will sound
twice.
“ON”: The incoming call tone will be heard for as
long as the line rings.
“OFF”: Deactivates this feature.
the room monitor feature (page 48) or while
listening to messages (page 62, 64), you can be
informed by 2 tones if a call arrives.
“2” (default): The incoming call tone will sound
twice.
“ON”: The incoming call tone will be heard for as
long as the line rings.
“OFF”: Deactivates this feature.
Note:
L
You can also program the base unit incoming
call tone with the handset (page 74).
call tone with the handset (page 74).
Code #74: Setting room monitor
ROOM MONITOR
MODE=OFF
MODE=OFF
[
±]
See page 48 for details.
Code #75: Setting the Caller ID number auto
edit feature
edit feature
CALLER ID EDIT
MODE=ON
MODE=ON
[
±]
See page 43 for details.
Code #76: Setting the connecting tone
CONNECTING TONE
MODE=ON
MODE=ON
[
±]
If you often have trouble when sending faxes,
this feature allows you to hear connecting tones;
fax tone, ring back tone and busy tone. You can
use those tones to confirm the status of the other
party’s machine.
this feature allows you to hear connecting tones;
fax tone, ring back tone and busy tone. You can
use those tones to confirm the status of the other
party’s machine.
L
If the ring back tone continues, the other
party’s machine may not be a facsimile or
may have run out of paper. Check with the
other party.
party’s machine may not be a facsimile or
may have run out of paper. Check with the
other party.
L
The connecting tone volume cannot be
adjusted.
adjusted.
“ON” (default): You will hear connecting tones.
“OFF”: Deactivates this feature.
“OFF”: Deactivates this feature.
0519_FPG381.book Page 72 Monday, May 19, 2003 6:46 PM