Sharp FO-DC500 Benutzerhandbuch
Inbound Routing
104
2
Press
and then
to select
FAX TRANSFER SETTING.
3
Press
. Make sure that SET is
selected.
4
Press .
5
Enter a 2-digit number from 01 to 41. This number is used to identify the
set that you are storing.
6
Enter a name for the set by pressing the letter entry keys (see Step 6 on
page 26). (Maximum of 20 characters.)
If you don’t want to enter a name, go directly to Step 7.
page 26). (Maximum of 20 characters.)
If you don’t want to enter a name, go directly to Step 7.
7
Press .
•
If “TRANSFER ALL” has already been
selected for a set, or if you are storing
the set from a personal book, you must
enter one or more sender’s numbers
(the display at right does not appear).
Go to step 10.
selected for a set, or if you are storing
the set from a personal book, you must
enter one or more sender’s numbers
(the display at right does not appear).
Go to step 10.
8
Press
or
to select INPUT TSI# if you wish to only forward
faxes from specific sender’s numbers.
Select TRANSFER ALL if you wish to forward all received faxes.
Select TRANSFER ALL if you wish to forward all received faxes.
9
Press .
•
If you selected TRANSFER ALL in Step 8, go to step 12.
START/
ENTER
ENTER
START/
ENTER
ENTER
START/
ENTER
ENTER
START/
ENTER
ENTER
START/
ENTER
ENTER
3:ENTRY MODE
ENTER
#(01-10, , )
FAX TRANSFER SETTING
1=SET
2=CLEAR
3=ON/OFF
2=CLEAR
3=ON/OFF
FAX TRANSFER SET
SETTING #=
ENTRY MODE
07:SYSTEM # MODE
08:STORE JUNK FAX #
09:DEPT. PASSCODE
08:STORE JUNK FAX #
09:DEPT. PASSCODE
10:BOOK ENTRY MODE
11:FAX TRANSFER SETTING
3:ENTRY MODE
ENTER
#(01-10, , )
FAX TRANSFER SET # 01
1=INPUT TSI#
2=TRANSFER ALL
2=TRANSFER ALL
The set number
appears here
appears here