Samsung CLX-6220 Benutzerhandbuch

Introduction_ 5

The color of the Status indicates the machine's current status.

•

The machine is off-line.

•

When the backlight slowly blinks, the machine 

is receiving data from the computer.

•

When the backlight blinks rapidly, the 

machine is printing data. 

The machine is on-line and can be used.

•

A minor error has occurred and the machine is 

waiting for the error to be cleared. Check the 

display message. When the problem is 

cleared, the machine resumes. 

•

A small amount of toner is left in the cartridge. 
The estimated cartridge life

a

a.Estimated cartridge life means the expected or estimated toner 

cartridge life, which indicates the average capacity of print-outs and is 

designed pursuant to ISO/IEC 19798. The number of pages may be 

affected by operating environment, printing interval, graphics, media 

type and media size. Some amount of toner may remain in the cartridge 

even when Replace new [ccc] toner appears and the printer stops 

printing.

 of toner is close. 

Prepare a new cartridge for replacement. You 

may temporarily increase the printing quality 

by redistributing the toner (See "Replacing the 

toner cartridge" on page 2, "Redistributing 

•

A toner cartridge has almost reached its 
estimated cartridge life

. It is recommended to 

replace the toner cartridge (See "Replacing 

the toner cartridge" on page 2).

•

A paper jam has occurred (See "Clearing 

•

The cover is opened. Close the cover.

•

There is no paper in the tray. Load paper in 

the tray.

•

The machine has stopped due to a major 

error. Check the display message (See 

page 8). 

Samsung does not recommend using non-genuine Samsung toner 

cartridge such as one that is refilled or remanufactured. Samsung 

cannot guarantee a non-genuine Samsung toner cartridge's quality. 

Service or repair required as a result of using non-genuine Samsung 

toner cartridges will not be covered under the machine warranty. 

•

All printing errors will be appear in the Smart Panel program window. 

If the problem persists, call for service.

•

Check the message on the display screen. Follow the instructions in 

the message or refer to troubleshooting part (See "Understanding 

display messages" on page 8). If the problem persists, call for 

service.

When you want to know the machine status and set your machine to use an 

advanced feature, click Menu button (See "Machine status and advanced 

feature" on page 1).

By pressing the 

 , you can: 

Press 

 during printing.

When the machine is not in use, save electricity by pressing the Power 

Saver button. Pressing this button for one second puts the machine into 

power save mode (See "Using the power saving mode" on page 3).
If you press this button for more than three seconds, a pop-up appears, 

asking if you want to turn the power off. If you choose Yes, the power is 

turned off. This button must then be used to turn the button on.

The machine is not in the power save mode.

The machine is in the power save mode.

In the following cases, the machine wakes up from the power save 

mode.

•

Data is received.

•

Front door or scan unit is opened.

•

Control panel key is pressed.

•

Power-switch turn the power on and off.