Samsung CLX-8540ND Benutzerhandbuch

.10   

<Faxing (Optional)>

The polling process is as follows:

Sender stores the originals in the machine. (Page 6.10)

Sender gives the Passcode to the receiver.

Receiver dials the fax number and enters the Passcode when 
requested. (Page 6.11)

Receiver presses Start to receive the stored fax. 

Press Fax from the Main screen.

Place the originals face up in the DADF. Or you can use the scanner 
glass with a single original document, face down.

Adjust the document settings in the Image tab and the Basic tab.

Press the Advanced tab > Polling > Store.

Press the input area then the pop up keyboard, enter Passcode 
(The four-digit number which you have to inform the receiver). If you 
do not want to set Passcode, enter number 0000 here. Then you 
can store, delete, print and receive a fax for polling without any 
passcode.

If you want to use the Mailbox, refer to Storing the originals in 
the Mailbox. (Page 6.12) 

Select the Delete On Poll option. If you select Off, the sent fax data 
will be remained in the machine’s memory even after it’s printing. If 
you select On, the fax data will be deleted at the printing point.

Press OK to start to store the originals into memory for polling.

Give the passcode to the receiver.

Press Fax from the Main screen.

Press the Advanced tab > Polling > Print (or Delete).

Enter Passcode 

Press OK.