Xerox 7428 Benutzerhandbuch
Network Management
WorkCentre 7425/7428/7435
System Administrator Guide
System Administrator Guide
60
To create a device description
To create a device description from your terminal's command line.
1. Select the F-4 key to prompt the CRTDEVPRT command. Enter the following parameters:
1. Select the F-4 key to prompt the CRTDEVPRT command. Enter the following parameters:
•
Device Description: Xeroxprinter
•
Device Class: *lan
•
Device Type: 3812
•
Device Model: 1
2. Press Enter to continue, and enter the following parameters:
•
Lan Attachment: *IP
•
Port Number: 9100
•
Online at IPL: *yes
•
Font Identifier: 11
•
Form Feed *autocut
Note:
For some versions of AS400, the default may match some of these parameters.
3. Leave all other parameters at their defaults, press Enter, and enter the following parameters:
•
Activation Timer: 170
•
Inactivity Timer: *sec15
•
Host Print Transform: *yes
4. Press Enter to continue, and enter the following parameter:
•
Manufacturer Type and Model: *hp5si
5. Leave the remaining parameters set to their default values and press Enter to continue. Enter the
following parameters:
•
•
Remote Location: Enter the IP address of the printer.
•
User defined options: *IBMSHRCNN
•
System driver program: *IBMSNMPDRV
6. Leave all other options set to the default values and press Enter. A message indicates that you
created the printer Xeroxprinter.
7. Set the printer on and start a print writer. Then place a spool file in the appropriate queue to test
the printer.