Xerox 432 Benutzerhandbuch
Xerox Document Centre 440/432/430/426/425/420 User Guide
Page 13-5
P
rob
lem S
o
lving
“Close lower left door” message.
¾
Slide the Finisher/High Capacity Feeder
away from the printer.
away from the printer.
¾
Open the lower left door and then close
it. Ensure the door is latched securely in
place before sliding the Finisher/High
Capacity Feeder back.
it. Ensure the door is latched securely in
place before sliding the Finisher/High
Capacity Feeder back.
The machine does not display the High
Capacity Feeder (or one of the paper trays)
in the Paper Supply selections.
Capacity Feeder (or one of the paper trays)
in the Paper Supply selections.
¾
Check to see if any paper trays are
open. If a tray is ajar, the machine
cannot sense its connection.
open. If a tray is ajar, the machine
cannot sense its connection.
¾
Open and close each paper tray and the
High Capacity Feeder, power OFF the
machine and then power ON the
machine.
High Capacity Feeder, power OFF the
machine and then power ON the
machine.
The touch screen does not display the
Finisher/Stapler option
Finisher/Stapler option
¾
Slide the Finisher into its correct
position. The Document Centre
configures itself when additional options
are attached.
position. The Document Centre
configures itself when additional options
are attached.
The machine does not accept documents
into memory
into memory
¾
Check with the Key Operator about the
available memory capacity. If the
memory is almost full, print and delete
unnecessary files.
available memory capacity. If the
memory is almost full, print and delete
unnecessary files.
The machine displays a memory full error
message
message
¾
Check with the Key Operator about
available memory.
available memory.
¾
Divide the remaining pages of the job
into several small jobs and run the job
again.
into several small jobs and run the job
again.
Symptom
Recommendation