Zebra Technologies 14080100000 Benutzerhandbuch

Operations
Load Media in Tear-Off Mode

P1009874-002

Xi4™/RXi4™ User Guide

1/7/10

Follow these instructions to operate the printer in Tear-Off mode.

Set the printer to Tear-Off mode. See 

 for instructions.

Insert media into the printer. See 

 for 

instructions.

Open the printhead assembly by rotating the printhead-open lever (

) counter-clockwise.

Loosen the thumb screw (not visible from this angle) that is located on the bottom of the 
outer media guide (

).

While performing any tasks near an open printhead, remove all rings, watches, 

hanging necklaces, identification badges, or other metallic objects that could touch the 
printhead. You are not required to turn off the printer power when working near an open 
printhead, but Zebra recommends it as a precaution. If you turn off the power, you will lose 
all temporary settings, such as label formats, and you must reload them before you resume 
printing.