Zebra Technologies 11280100000 Benutzerhandbuch
111
Configuration
Standard Control Panel Parameters
1/7/10
Xi4™/RXi4™ User Guide
P1009874-002
Select Format Convert
Selects the bitmap scaling factor. The first number is the original dots per
inch (dpi) value; the second, the dpi to which you would like to scale.
Selects the bitmap scaling factor. The first number is the original dots per
inch (dpi) value; the second, the dpi to which you would like to scale.
Default Value: NONE
Selections: NONE, 150
→ 300, 150 → 600, 200 → 600, 300 → 600
To change the value shown:
1.
Press
PLUS (+)
or
MINUS (-)
to scroll through the options.
Select Idle Display
This parameter selects the LCD options for the real-time clock.
This parameter selects the LCD options for the real-time clock.
Note •
If the default value is not selected, pressing
PLUS (+)
or
MINUS (-)
briefly displays the firmware version of the printer.
Default Value: FIRMWARE (FW) VERSION
Selections: MM/DD/YY (24HR), MM/DD/YY (12HR),
DD/MM/YY (24HR), DD/MM/YY (12HR), FW VERSION
DD/MM/YY (24HR), DD/MM/YY (12HR), FW VERSION
To change the value shown:
1.
Press
PLUS (+)
or
MINUS (-)
to scroll through the options.
Set Real-Time Clock (RTC) Date
This parameter allows you to set the date following the convention selected
in
This parameter allows you to set the date following the convention selected
in
IDLE DISPLAY
.
To change the value shown:
1.
Press
MINUS (-)
to move to the next digit position.
2.
Press
PLUS (+)
to change the value of the digit.
Set RTC Time
This parameter allows you to set the time following the convention selected
in
This parameter allows you to set the time following the convention selected
in
IDLE DISPLAY
.
To change the value shown:
1.
Press
MINUS (-)
to move to the next digit position.
2.
Press
PLUS (+)
to change the value of the digit.
Specify Password Level
This parameter allows you to select whether certain factory-selected menu
items or all menu items are password protected.
This parameter allows you to select whether certain factory-selected menu
items or all menu items are password protected.
Default Value: SELECTED ITEMS
Selections: SELECTED ITEMS, ALL ITEMS
1.
Press
PLUS (+)
or
MINUS (-)
to toggle between the options.
Table 8 • Printer Parameters (Sheet 21 of 22)
Language/Parameter
Action/Explanation