Zebra Technologies 11280100000 Benutzerhandbuch

Select a Data Communication Interface

1/7/10

Xi4™/RXi4™ User Guide

P1009874-002

 provides basic information about data communication interfaces that you can use to 

connect your printer to a computer. You may send label formats to the printer through any data 
communication interface that is available. Select an interface that is supported by both your 
printer and your computer or your Local Area Network (LAN).

 also shows how to connect the different types of data cables to your printer and 

computer. The connectors on the back of your computer may be in different locations than on 
the sample computer shown in this section.

Ensure that the printer power is off (

) before connecting data communications 

cables. Connecting a data communications cable while the power is on (

) may damage the 

printer.

RS-232 Serial

Standard

• Maximum cable length of 50 ft (15.24 m).

• You may need to change printer parameters to match the host 

computer.

• You need to use a null-modem adaptor to connect to the printer 

if using a standard modem cable.

Connections and Configuration  The baud rate, number of 
data and stop bits, the parity, and the XON/XOFF or DTR control 
must match those of the host computer. See 

 to view or change these parameters.