Zebra Technologies 11380100000 Benutzerhandbuch

Printer Diagnostics

4/30/13

Xi4™/RXi4™ User Guide

P1009874-003

Use the sensor profile label to troubleshoot the following types of problems:

• If the media sensor experiences difficulty in determining gaps (web) between labels.

• If the media sensor incorrectly identifies preprinted areas on a label as gaps (web).

• If the ribbon sensor cannot detect ribbon.

For instructions on printing a sensor profile, see 

. If the 

sensitivity of the sensors must be adjusted, perform 

)  The bars (

) on the sensor profile indicate the ribbon 

sensor readings. The ribbon sensor threshold setting is indicated by the word 

RIBBON

(

). If 

the ribbon readings are below the threshold value, the printer does not acknowledge that 
ribbon is loaded.

)  The media sensor readings are shown as bars and flat 

areas on the sensor profile. The bars (

) indicate gaps between labels (the web), and the low 

areas (

) indicate where labels are located. If you compare the sensor profile printout to a 

blank length of your media, the bars should be the same distance apart as the gaps on the 
media. If the distances are not the same, the printer may be having difficulty determining 
where the gaps are located.

The media sensor threshold settings are shown by the words 

MEDIA (

) 

for the media 

threshold and 

WEB

 (

) for the web threshold. Use the numbers to the left of the sensor 

readings to compare the numeric readings to the sensor settings.