Omega Engineering OMB-1108-0901 Benutzerhandbuch

DaqTemp Series User’s Manual                                                       

08-27-02

CE-Compliance     5-5

1.  Connect one end of the CA-195CE Cable to DaqBoard/2000 Series Board’s

P4 connector.  Note that either end of the cable can be connected to the
board; however, the white locator triangles must align with each other. 

2.  Align the Cable Clamp (1033-2009) with the

CE ORB and secure the items with two
4-40 x 3/16 screws (provided).

Note: In the right hand figure, the cable is not shown to

allow for greater clarity of parts.

Using Cable Clamps 1033-2009, 1033-2010, and two 4-40 x 5/16 screws, secure the Grounding Pigtail to
the cable.  Note that the Clamps must be positioned over the cable’s Copper Band as indicated in the first
figure on this page.  Tighten screws snug, but do not over tighten.

Note:  In the following figure, the cable is not shown to allow for greater clarity of parts.