Ultra electronic M9007-225E Benutzerhandbuch

 
 
 
 
 

Page 11 of 31 

 

 
 
 
 
 
 
 
 
 
 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

We recommend that you clean your printer using a cleaning card after every 250 prints or each time you replace the dye-film. 
You should do this more often if you print only a few cards a day. 
 

• 

The printer must be switched ON. 

• 

Remove the card hopper and open the top door (the red light comes on). 

• 

Ensure the dye film is not touching the base of the printer inside. If it is, take up the slack by winding the supply spool 
backwards or remove the dye film before starting the cleaning cycle. 

• 

Take a fresh cleaning card from its packaging. 

 

 

• 

Insert the narrow end into the card feed slot 

(picture 1)

. 

 

 

 

 

 

• 

Press the black button on the back of the printer (located above the USB connector). 
The card is drawn into the printer 

(picture 2) 

and then ejected. Repeat this several 

times with both sides of the same card. 

 

 

 

 

• 

To ensure that the rear feed rollers located under the card hopper 
are thoroughly cleaned, set the printer to its cleaning cycle, and 
instead of inserting the card, simply hold it against these rollers 

(picture 3)

. 

 

Three cleaning cards are bundled with each new Avalon printer. You can purchase additional cleaning kits, which include 
cleaning cards, rollers and pens. 

• 

Part # M9005-761 - 10 cleaning cards, 5 rollers and a cleaning pen. 

• 

Part # N9005-761 Medium - 10 cleaning cards, 3 rollers, and 2 cleaning pens. 

• 

Part # N9005-761 Large - 20 cleaning cards, 6 rollers, and 3 cleaning pens.