Epson SP9900HDR Benutzerhandbuch

7. Lift the printer using the hand grips where provided. (See the stickers 

located near the rear hand grips for the correct holding position.) 

8. Keep the printer level while moving it. See page 184 for information 

about setting up the printer after transporting it.

To ship the printer a longer distance, you should repack it using the original 
box and packing materials. If you don’t have the original packaging, you can 
purchase replacement packaging from Epson. See page 12 for more 
information.

When you need to move the printer a short distance, such as within the same 
building, you can roll the printer on its casters. 

1. Make sure the printer is turned off and the carriage is in the home 

position (on the far right). If not, turn the printer back on, wait until the 
carriage moves to the home position, then turn off the printer. 

2. Disconnect the power cord and interface cable.

3. Remove any paper and close the roll paper cover. Make sure the front 

cover is closed.

4. Store the paper basket as described on page 82.

WARNING: The printer is 
very heavy. Make sure you 
have four people lift it.

Caution: Do not roll the 
printer on angled or 
uneven surfaces.