Epson EPL-6200 Benutzerhandbuch
EPSON EPL-6200/EPL-6200L
Revision A
Product Description
Control Panel (EPL-6200L)
48
1.6.2 Printer Setting Items
A list of setting items for this printer is shown below.
Setting Items for which the Printer Stores the Changed Settings
Note : Values shown in bold and underlined characters are the factory default setting
values.
Note “*1”: 15 minutes.
“*2”: These setting operations are not opened to users.
For setting method, see
.
Setting Items that are Valid only in the Job, and are not be Stored in the Printer
Users can select setting items on the printer driver, and actual processing is performed
by the printer.
by the printer.
Setting Items Requiring Administration by the Printer for each Printing or state
change
change
Note : The “*” means that those items are under control of EEPROM.
Table 1-52. Function Setting (1)
Setting item
Setting values
Sleep Mode
ON, OFF
*1
Toner Out Error
Continue, Stop
Physical OffsetTop
*2
-3.5 ~ 0 ~ 3.5 (mm) step 05.mm
Physical Offset Left
*2
-3.5 ~ 0 ~ 3.5 (mm) step 05.mm
Humidity
*2
Normal, High
Table 1-53. Function Setting (2)
Setting item
Setting values
Paper Size
A4, A5, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, MON, C10,
DL, C5, C6, IB5, User defined size
User defined size Width 76.2. ~ 216.0mm
DL, C5, C6, IB5, User defined size
User defined size Width 76.2. ~ 216.0mm
Length 127.0 ~ 355.6mm
Copies
1 ~ 999
Toner Save
ON, OFF
Top Offset
-9 ~ 0 ~ 9 mm
Left Offset
-9 ~ 0 ~ 9 mm
Paper Type
Normal, Thick-Wide, Thick-Narrow Transparency
Density
1, 2, 3, 4, 5
Auto Continue
ON, OFF
Ignore Paper Size
ON, OFF
Table 1-54. Function Setting (3)
Administrative
items Range of values
*Total Pages
0 ~ 99999999 pages
*Jam Counts
0 ~ 65534 times
*Genuine Toner Change
0 ~ 254
*Non genuine Toner Change
0 ~ 254
*Toner Life counter
0 ~ 100%
(Both 3K and 6K will reset to 100% by counter reset)
(Both 3K and 6K will reset to 100% by counter reset)
*Photoconductor Life counter
0 ~ 100%
*USB ID
MP Tray Paper Size
MP Tray Paper Size
A4, A5, B5, LT, HLT, LGL, GLT, GLG, EXE, F4, MON,
C10, DL, C5, C6, IB5, User defined size
C10, DL, C5, C6, IB5, User defined size
Interface mode of Parallel I/F
ECP, Nibble
Firmware version
*Registration position
(paper feed direction)
*Registration position
(paper feed direction)
-5.98 ~ 5.98 mm step 0.46mm
CSIC items
C H E C K
P O I N T
Since character strings administrated in the printer do not exist,
names of setting items and setting values are described in names for
explanation. Consequently, these names do not match character
strings displayed in driver's user interfaces and the Status Sheet.
names of setting items and setting values are described in names for
explanation. Consequently, these names do not match character
strings displayed in driver's user interfaces and the Status Sheet.