DELL 1355cn Benutzerhandbuch

Dell Printer Configuration Web Tool

To specify the client when scanning data.

Trap Address Type Select the trap address type from the list. 

Selecting Off clears the settings in Trap Address, 

Port Number, and Notify, and does not notify 

trap occurrence. Selecting IPv4 or IPv6 allows 

you to enter Trap Address.

Specifies the IP address and IP socket in the 

following format:

• IPv4

Specifies the IP address and IP socket in the 

nnn.nnn.nnn.nnn:mmmmm format. Each 

section of "nnn" is a variable value between 0 

and 255. Note that values 127 and 224-254 are 

not valid for the first three-digits only. IP socket 

mmmmm is a variable value between 0 and 

65535.

• IPv6

Specifies the IP address and IP socket in the 

xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:mmm

mm format. Each section of "xxxx" is a 

hexadecimal variable value between 0 and ffff. 

IP socket mmmmm is a variable value between 0 

and 65535.

Enter the SNMP trap destination port number.

Specifies whether to notify trap occurrence. 

Specifies whether to notify Authenticate Error 

Trap.

Sets the connection time-out period from 1 to 60 

seconds.

Sets whether to enable the FTP Passive mode.