Brother MFC7860DW Benutzerhandbuch

Replace Toner

The machine will stop printing 
until you replace the toner 
cartridge.

If you have set the Toner setting to Stop, 
replace the toner cartridge with a new and 
unused original Brother toner cartridge. This 
will reset the Replace Toner mode. (See 
Replacing the toner cartridge on page 53.)

If you have set the Toner setting to 
Continue, the machine will continue to 
print data until the LCD shows Toner 
Ended. For how to operate the machine in 
Continue mode, see Toner Settings in 
Chapter 1 of the Advanced User's Guide.

Scan Unable XX

The machine has a mechanical 
problem.



(For MFC-7360N and MFC-7460DN ) 
See Transferring your faxes or Fax 
Journal report on page 69 before 
disconnecting the machine so you will 
not lose any important messages. Then, 
disconnect the machine from the power 
for several minutes and then reconnect 
it.

(For MFC-7860DW) 
Disconnect the machine from the power 
for several minutes, then reconnect it.



If the problem continues, call Brother 
Customer Service.

Size Error DX

The paper in the tray is not a 
suitable size for automatic duplex 
printing.

Load either Letter, Legal or Folio paper for 
automatic duplex printing, and then press 
Start. (See Print media on page 127.)

Size mismatch

The paper in the tray is not a 
correct size.

Load an appropriate size of paper in the 
tray, and re-set the “Paper Size” (Menu, 1, 
2, 2). (See Paper Size on page 17.)

Toner Ended

It is time to replace the toner 
cartridge.

Replace the toner cartridge with a new one. 
(See Replacing the toner cartridge 
on page 53.)

Toner Low

The toner is low.

Buy a new toner cartridge before you get a 
Replace Toner message.