Canon MultiPASS MP730 Benutzerhandbuch
Chapter 3
Print media handling
3-7
3
Print media handling
Loading print media
Loading paper
Follow this procedure to load paper in the multi-purpose tray:
Loading envelopes
Follow this procedure to load envelopes in the multi-purpose tray:
1
Remove the tray cover.
2
Place a stack of paper (print side up) in the
multi-purpose tray q. Pinch the paper
guide A and adjust to the width of the stack
w.
multi-purpose tray q. Pinch the paper
guide A and adjust to the width of the stack
w.
IMPORTANT
• Make sure the stack does not exceed the paper
limit mark B or tab C. Otherwise a paper jam
may occur.
may occur.
3
Replace the tray cover over the
multi-purpose tray.
multi-purpose tray.
1
Make sure the paper thickness lever is set to
the right.
the right.
2
Remove the tray cover.
3
Prepare the envelopes for loading:
Press down firmly on the edges of the
envelopes to make the folds crisp. Also,
press firmly on the area that corresponds to
the edges of the back flap.
Press down firmly on the edges of the
envelopes to make the folds crisp. Also,
press firmly on the area that corresponds to
the edges of the back flap.
Remove any curling by holding the edges
diagonally and bending them gently.
diagonally and bending them gently.
q
w
B
C
A