Canon 3749B002 Benutzerhandbuch

Network Connection

For details on how to check the following information, refer to the manual of your access point or router, 

or contact its manufacturer.

Check the Information for Wireless Connection

■

The following information is required to connect to your access point or router.
Check your access point or router for the following information, then write it down.

Access Point Name/Network Name:

Network Key:

* Also referred to as SSID.

* Also referred to as encryption key, WEP key or WPA/WPA2 passphrase, Pre-Shared key.

If your access point or router 

supports WPS (Wi-Fi Protected 

Setup):

□

If you are using Windows Vista operating 

system and have a USB flash drive, you 

can configure wireless connection settings 

by using the WCN (Windows Connect 

Now) function as well. For details, refer 

to "Wireless Setup Using WCN (Windows 

Connect Now)" in "Reference Information" 

on page 59.

•

A wireless connection can be set up easily 

without checking the information to the 

left. Go to "Wireless Setup Using WPS 

(Wi-Fi Protected Setup)" on page 27.

An identifier to identify the specific access point.

A password required to set to prevent unauthorized access to communication.

You can retrieve your network key by using the Canon PIXMA Wireless Setup Assistant or the instructions 

which can be downloaded from the Canon support webpage (www.usa.canon.com/downloadlibrary).
If you are unable to retrieve the network key or other settings, refer to the manual of your access point or 

router, or contact its manufacturer.