Canon 2237B008AA Benutzerhandbuch

2‑23

Original and Paper

When entering the value in millimeters, 
you can also change the value by 
pressing [‑] or [+] in increments of 
1.0 mm, even if you have entered the 
value.
If you enter a value outside the setting 
range, [OK] is grayed out and cannot be 
selected. Enter an appropriate value.
You can use values for [X] between 5 
7/8" (148 mm) and 17" (432 mm), and 
for [Y] between 3 3/4" (95 mm) and 11 
11/16" (297 mm).

① Select the desired paper type.

② Press [OK].

When printing on special types of paper, 
such as heavyweight paper, be sure to 
correctly set the paper type, especially 
if you are using heavyweight paper. If 
the type of paper is not set correctly, 
it could adversely affect the quality of 
the image. Moreover, the fixing unit 
may become dirty and require a service 
repair, or the paper could jam.
If you select [Irreg. Size], you cannot use 
the 1

▶2‑Sided, 2▶2‑Sided, or Book▶2‑

Sided mode.

–

–

–

–

–

②

①

②

①

① Select the envelope type.

② Press [OK].

If the envelope type is not selected 
correctly, a paper jam may occur.
If you select [Envelope], you cannot use 
the 1

▶2‑Sided, 2▶2‑Sided, Book▶2‑

Sided, 2‑page Separation, or Image 
Combination mode.

[Transparency] can be selected only if 
[LTR] is selected as the paper size.

●

–

–

①

②

①

②