Canon Z5000 Benutzerhandbuch

If you make a mistake during Setup, you can always use the Menu button to 

cancel without saving changes. Pressing the Menu button cancels what you are doing 
in the current screen to bring you to the next higher-level menu. You may need to press 
Menu more than once to return to the top level for the particular Setup in which you 
are working. Once at the top level, you can enter a Setup menu again, or exit without 
making changes.

When you have entered the settings, you need to save the changes. You are usually 
prompted to do so. If you choose Yes, your settings overwrite previous settings. If you 
choose No, your previous settings are retained. If necessary, the ColorPASS reboots 
after you exit from the Setup menu.

The Server Setup menu lets you specify system information that pertains to the 
ColorPASS itself and all users. Accessing the menu is described on page 3-4.

When you choose Server Setup, the options appear in sequence as described below. 
Default values, where applicable, appear in square brackets. Words shown in italics 
indicate that a product- or site-specific value is displayed.

Enter a name for the ColorPASS (up to 15 characters long). This is the name that 
appears in the Chooser on an AppleTalk network.

Do not use the device name (5000) as the server name. Also, if you have more 

than one ColorPASS, do not give them the same name. Windows NT is not designed 
to handle two computers with the same name in the same workgroup or domain.