Eizo S2410W Benutzerhandbuch
2-3. Connecting Two PCs to the Monitor
Two PCs can be connected to the monitor through the DVI-I and the D-Sub mini 15 pin connector on the
back of the monitor.
back of the monitor.
Connecting Examples
SIGNAL 1
SIGNAL 2
(Ex.1) Analog
D-Sub
mini 15
pin
mini 15
pin
Signal Cable
(FD-C16 enclosed)
(FD-C16 enclosed)
Signal Cable
(FD-C39 enclosed)
(FD-C39 enclosed)
DVI
Digital
(Ex.2) Analog
D-Sub
mini 15
pin
mini 15
pin
Signal Cable
(FD-C16 enclosed)
(FD-C16 enclosed)
Signal Cable
(FD-C16 optional)
(FD-C16 optional)
D-Sub
mini
15 pin
mini
15 pin
Analog
(Ex.3) Digital DVI
Signal Cable
(FD-C39 enclosed)
(FD-C39 enclosed)
Signal Cable
(FD-C39 optional)
(FD-C39 optional)
DVI
Digital
Selecting the Active Input
The Input Signal Selection switch on the control panel can be used to select either SIGNAL 1 or SIGNAL
2 as the active input at any time. Every time the switch is touched, the input changes. When switching the
signal, the kind of the input signal (Signal 1 or 2/ Analog or Digital) is displayed for a few seconds on the
right top corner of the screen.
2 as the active input at any time. Every time the switch is touched, the input changes. When switching the
signal, the kind of the input signal (Signal 1 or 2/ Analog or Digital) is displayed for a few seconds on the
right top corner of the screen.
The Priority Input Signal