Ricoh A251 Benutzerhandbuch

9. Set Paper and RF

The Set Paper indicator on the left lights when you select Bypass.

Select indicators

The RF Select indicator on the right lights when you select Roll

Paper.

10. Clear Modes/Energy

Cancels all current settings. When you hold down

Saver key

this key for three seconds or more, the copier enters
Energy Saver mode allowing you to conserve power.
To exit Energy Saver mode, press this key again.

11. Program key

Allows you to recall or set a program.

12. Function Select key

Press to change which setting you are editing. The current selec-

tion is shown by the indicators
above: Paper Length

Leading Edge
Trailing Edge
Copy Counter

Also use this key to copy a selected portion of an original.

13. Plus and minus key

Press to increase the setting being edited.
Press to decrease the value being edited.

14. Leading Edge/Trailing

Displays the margin settings and the number of copies

Edge/Copy Counter

made.

indicator

15. Bypass Select/Roll

Selects the paper feed type (when the Roll Feeder

Paper Cut key

option is installed). Also press to stop a copy job.

16. Copy Media key

Press to select the type of copy paper you are using.
The copier will apply more or less heat accordingly.

17. Emergency Stop

Press to stop the copying process immediately.

key

Use if your original is getting stuck in the copier.
If you stop the operation by pressing this key, remove both the
original and paper.

18. Density indicator

Shows the density level the copies will have.

Density keys

Press the left key to make copies lighter.
Press the right key to make copies darker.

19. Clear/Stop key

While entering numbers, press to cancel a number to have entered.

While copying, press to stop copying.
After copying has finished, press this key, then remove the origi-
nal.