Olivetti 150D Benutzerhandbuch

Seite von 81
48
Setting a large original (12 cpm model only)
The original cover can be removed to allow copying of bulky objects.
1
Simply lift the original cover straight 
up.
2
To reattach the original cover, reverse the above procedure.
Using the SPF
The SPF is designed to hold up to 30 originals measuring from A5 to A4 and
weighting from 52 to 90 g/m
2
.
1
Make sure that no original is left on the original table.
2
Adjust the original guides to the size 
of originals.
3
Set the originals face up in the 
original feeder tray.
Before feeding originals in the original feeder tray, be sure to remove 
any staples or paper clips from them.
Before placing curled or wavy originals into the original feeder tray, be 
sure to flatten them. If not, original misfeeds may result.
The SPF (
) indicator on the operation panel will light up. If this 
indicator does not light up, the originals are not properly set or the 
SPF is not properly closed.
Badly damaged originals may misfeed in the SPF. It is recommended 
that such originals be copied from the original table.
Special originals such as transparency film should not be fed through 
the SPF, but should be placed directly on the original table.
Image loss (max. 4 mm) can occur at the leading and trailing edges of 
the copies. Also image loss (max. 4.5 mm in total) can occur along the 
other edges of the copies. It can be 6 mm (max.) at the trailing edge of 
the second copy of two-sided copying.
To stop continuous copying using the SPF, press the clear (
)
 
key.
Original face up