Infocus INF55WIN8 Benutzerhandbuch

Page 27

INF55WIN8 Hardware Guide

Touchpad functions are not function-
ing consistently

•  Remove all objects placed on the lip of the monitor and/or within 2” of the touchpad 

screen.

•  Disable PiP feature. 
•  Power the monitor off and back on after a few seconds. Re-booting the monitor helps 

the touchpad to re-synchronize.

Remote is not working

•  Make sure the batteries are installed in the proper orientation and are not dead.
•  Verify the remote is turned on (the button is on the bottom of the remote).
•  Verify you are pointing the remote at the table and are within 26’ (8m) and 30 degrees 

(horz/vert) of the sensor.

•  Verify that the IR Control setting in the Advanced Option OSD menu is set to Normal.

Keypad and/or mouse is not working •  Make sure the batteries are installed in the proper orientation and are not dead.

•  Press the Connect button on the bottom of the keypad.
•  Verify the USB adapter is installed into the monitor's USB port.
•  Verify that the Keyboard Control setting in the Advanced Option OSD menu is set to 

Unlock.

Off

Off

•  The monitor is completely shut-down. Verify the power cord is properly 

connected to the power outlet and to the monitor. Verify that the power 
switch on the back of the unit is turned on. Plug another electrical device 
to the power outlet to verify that the outlet is supplying the proper volt-
age.

Red

Off

•  The monitor is hibernating. Press the Power button on the remote or 

keypad.

Orange

Blinking Green

•  The monitor is in standby mode. Press the Power button on the remote 

or keypad.

Green

Green

•  The monitor is powered on.

InFocus Corporation
Technical Support
6am-5pm PST
877-388-8385
www.infocus.com/support