iiyama PB1704S Benutzerhandbuch
2
BEFORE YOU OPERATE THE MONITOR
[Stopper] ProLite PB1704S
ProLite PB1904S
Please stand the monitor and then remove
the stopper on the back of the sand slowly.
CONNECTING
・ To connect the monitor to your PC
1.
Make sure that the PC and the monitor is unplugged.
2.
Connect the 15-pin signal cable to the monitor and The PC (see fig. 2a)
3.
If you have a graphic card with a digital DVI-D connector (24-pin socket), then
connect one end of the DVI-D cable to the DVI-D connector of your monitor (see
fig. 2b), the other end to the computer.
fig. 2b), the other end to the computer.
Figure 2a. Figure 2b.
・ Connecting the audio cable
If your computer is equipped with an audio output port, connect one end of the sound
cable to the audio Input connector of the monitor (① in fig. 3) and the other end to the
Line-Out connector of the computer.
Signal cable
DVI-D cable
Connecting the monitor to
the PC
the PC
Connection via the DVI-D
interface
interface