iiyama E1706S Benutzerhandbuch
ENGLISH
24 TROUBLE SHOOTING
TROUBLE SHOOTING
1. Perform the adjustments described in OPERATING THE MONITOR, depending on the problem
you have. If the monitor does not get a picture, skip to 2.
2. Consult the following items if you cannot fi nd an appropriate adjustment item in OPERATING THE
MONITOR or if the problem persists.
3. If you are experiencing a problem which is not described below or you cannot correct the
problem, discontinue using the monitor and contact your dealer or iiyama service center for further
assistance.
assistance.
Problem
Check
(Power indicator is
orange.)
orange.)
B
The screen is not
synchronized.
synchronized.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
The video output level of the computer is within the specifi cation of the
monitor.
C
T h e s c r e e n
position is not in
the center.
position is not in
the center.
The signal timing of the computer is within the specifi cation of the monitor.
D
The screen is too
bright or too dark.
bright or too dark.
E
T h e s c r e e n i s
shaking.
shaking.
The video output level of the computer is within the specifi cation of the
monitor.
The power voltage is within the specifi cation of the monitor.
The signal timing of the computer is within the specifi cation of the monitor.
If the monitor fails to operate correctly, please follow the steps below for a possible solution.
(Power indicator is
blue.)
blue.)
A
The picture does
not appear.
not appear.
(Power indicator
does not light up.)
does not light up.)
The Power Cable is fi rmly seated in the socket.
The Power Switch is turned ON.
The AC socket is live. Please check with another piece of equipment.
If the blank screen saver is in active mode, touch the keyboard or the
mouse.
Increase the Contrast and/or Brightness.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.
If the monitor is in power management mode, touch the keyboard or the
mouse.
The computer is ON.
The Signal Cable is properly connected.
The signal timing of the computer is within the specifi cation of the monitor.