iiyama E1706S Benutzerhandbuch

  FOR YOUR SAFETY  3  

The following symptoms are normal with LCD monitors and do not indicate a problem.



When you fi rst turn on the LCD monitor, the picture may not fi t in the display area 

because of the type of computer that is used. In this case, adjust the picture position 

to the correct position.



Due to the nature of the backlight, the screen may fl icker during initial use. Turn off 

the Power Switch and then turn it on again to make sure the fl icker disappears.



You may fi nd slightly uneven brightness on the screen depending on the desktop 

pattern you use.



Due to the nature of the LCD screen, an afterimage of the previous screen may 

remain after switching the image, when the same image is displayed for hours. In 

this case, the screen is recovered slowly by changing the image or turning off the 

Power Switch for hours.



Contact your dealer or iiyama service center for the backlight replacement when the 

screen is dark, fl ickering or not lighting up. Never attempt to replace it by yourself.



The fl uorescent light used in the LCD monitor may have to be periodically replaced. 

For the warranty coverage on this component, please check with local iiyama 

service center.



If you have to return your unit for service and the original packaging has been 

discarded, please contact your dealer or iiyama service center for advice or 

replacement packaging.



If you drop any materials or liquids such as water into the monitor when cleaning, 
unplug the power cable immediately and contact your dealer or iiyama service center.



For safety reasons, turn off the power switch and unplug the monitor before you 
clean it.



To protect the LCD panel, do not scratch or rub the screen with a hard object.



Never use any of the following strong solvents. These will damage the cabinet and 
the LCD screen.



Touching the cabinet with any product made from rubber or plastic for a long time 
may cause degeneration or loss of paint on the cabinet.

Thinner

Benzine

Abrasive cleaner

Spray-type cleaner

Wax

Acid or Alkaline solvent

Stains can be removed with a cloth lightly moistened with a mild detergent solvent. 

Then wipe the cabinet with a soft dry cloth. 

Periodic cleaning with a soft dry cloth is recommended.

Don't use tissue paper etc. because these will damage the LCD screen.