Sharp PN-455 Benutzerhandbuch
14
E
Connecting Peripheral Equipment
(Continued)
INPUT2 (PC ANALOG)
• Connect with the display connector on your computer using a RGB cable (commercially available).
• Connect with an audio output jack on your computer using a PC audio cable (commercially avail-
• Connect with an audio output jack on your computer using a PC audio cable (commercially avail-
able).
RGB cable
PC audio cable
Audio
Display
connector
Output terminals on
connected equipment
PC AUDIO
IN
INPUT2
(RGB)
PC audio input terminal
PC analog
RGB input terminal
RGB input terminal
▼ Rear view
*1 Auto-detects sync signal type.
*2 Sync signal presence is detected in the order: Composite Sync, Separate Sync and Sync-on-green. If for
*2 Sync signal presence is detected in the order: Composite Sync, Separate Sync and Sync-on-green. If for
some reason Composite Sync and Separate Sync are not input, the system will operate assuming that the
signal is a Sync-on-green (i.e. that the sync signal is contained in the G signal of RGB). This may result in
an unstable image, depending on the video signal.
signal is a Sync-on-green (i.e. that the sync signal is contained in the G signal of RGB). This may result in
an unstable image, depending on the video signal.
*3 See page 56 for compatible signals.